Shandong Yibo Optronics Technology Co., Ltd.
Ebocom - A Leading Fiber Optic Cable Manufacturer in China
Add to Cart
GYTC8S fiber optic cable, the structure of the cable is made of high modulus plastic inpacked waterproof composite loose tube, single mode and multi-mode optical fiber, metal reinforced suspension line, steel-PE cement sheath of self-supporting loose tube twisted outdoor communication cable. There is an FRP in the middle of the cable core. The compact circular cable core is composed of a loose sleeve (packing gasket) and a center reinforced core, and the gap of the cable core is filled with a water-blocking compound. After laying the metal reinforced cable parallel to the cable core, the PE sheath is the cable core, and the cable core is longitudinally covered with a plastic plated plastic steel strip
* Precise control of the additional length of the fiber to ensure good tensile resistance and environmental protection characteristics of the cable.
* Double-sided plastic plated steel tape provides an excellent moisture resistance and side compression resistance.
* Galvanized steel strand guarantees the tensile strength required for self-supporting cable installation.
* The cable is suitable for self-supporting overhead wiring with a span of 100m or less. It provides for more efficient construction while saving on suspension lines and cable hangers.
This product is suitable for long-distance and intra-office communication.
Fiber Specifications:
| Technical parameter of G.652D (B1.3) single-mode optical fiber | |||
| Characteristics | Conditions | Specified Values | Units |
| Optical Characteristics | |||
| Mode field diameter (MFD) | 1310nm 1550nm | 9.2±0.4 10.4±0.8 | µm µm |
| Cut-off wavelength (λcc) | ≤1260 | nm | |
| Attenuation coefficient | 1310nm 1383nm 1550nm | <0.35 <0.35 <0.22 | dB/km dB/km dB/km |
| Macro bending loss | φ75mm, 100circles, at 1550nm | ≤0.1 | dB |
| Attenuation non-uniformity | ≤0.05 | dB | |
| Dispersion coefficient | 1288~1339nm 1271~1360nm 1550nm | ≤3.5 ≤5.3 ≤18 | Ps/(nm.km) Ps/(nm.km) Ps/(nm.km) |
| Zero dispersion wavelength | 1300~1324 | nm | |
| Max zero dispersion slope | ≤0.093 | Ps/(nm2.km) | |
| Group index of refraction (typical value) | 1310nm 1550nm | 1.466 1.467 | |
| Geometric characteristic | |||
| Cladding diameter | 125.0±1.0 | µm | |
| Core/cladding concentricity error | ≤0.8 | µm | |
| Cladding non-circularity | ≤1.0 | % | |
| Coating diameter | 245.0±10 | µm | |
| Cladding/coating concentricity error | ≤12.0 | µm | |
| Coating non-circularity | ≤8 | % | |
| Diameter of colored coating | 250.0±15 | µm | |
| Mechanical characteristic | |||
| Curling (radius) | ≥4 | m | |
| Proof stress | >0.69 | Gpa | |
| Coating strip force | Average value Peak value | 1.0-5.0 1.3-8.9 | N N |
| Dynamic stress corrosion susceptibility parameter (nd value) | ≥20 | ||